Shure SM7B Specs
 
 
Frequency Response
50 Hz - 20 kHz
Primary Applications
Studio Recording, Broadcast
Form Factor
Stand/Boom Mount
Dynamic Range (Typical)
not specified by manufacturer
Signal-to-Noise Ratio
Electromagnetic Hum Sensitivity (Typical, Equivalent SPL/milliOersted)
60Hz: 11dB
500Hz: 24dB
1 kHz: 33dB
Intended Sound Sources
Vocals, Speech/Voice Over
Maximum Input Sound Level
not specified by manufacturer
Sound Field
Mono
Power Requirements
None Dynamic, Requires No Phantom or Battery Power
Output Impedance
150 Ohms
Stereo/Surround Configuration
Center
Operating Principle
Pressure Operated
Output Connectors
XLR-3M Type
Applications
Best for Voice Over (Broadcast Announcer) Work
Capsule
Dynamic
Dimensions
7.469 x 2.5" (189.7 x 96 mm) LxDiameter
Weight
1 lb. 11 oz. (765.4 g)
Polar Pattern
Cardioid
Specialties
Low Frequency Roll-Off: Bass Roll-Off and Mid-Range Emphasis Switch
Orientation
End Address
High-Pass Filter
Yes
On-Board Controls
HF, High-Pass Filter
Windscreen
Foam (Included)
 
Performance
Frequency Range
50 Hz to 20 kHz
Impedance
150 Ohms
Sensitivity
-59 dBV/Pa at 1 kHz
Output Level
-59 dB (1 kHz)
 
Connectivity
Output Connectors (Analog)
1 x XLR 3-Pin Male (on Mic)
 
Physical
Color
Gray
Mounting
Mic Clip/Stand Adapter (with Included Hardware)
Mounting Thread Size
5/8"-27 Female
Included Case
None
Included Filters
None
Construction Material
Aluminum, Steel
Dimensions
ø: 2.5H: 5.9 x W: 7.8" / ø: 6.3H: 15 x W: 19.8 cm
Weight
1.69 lb / 766.57 g